Our ornamental fences share the same extruded aluminum structure and set themselves apart through their visual signature: spiral cap, emphasized horizontal rail, alternating pickets or contemporary lines. Every residential model accepts a Quebec-compliant pool gate, see our pool fence page for details.
The traditional ornamental model, with a spiral cap on every picket. Cast aluminum accessories and symmetrical lines that fit a classic house just as well as a pool enclosure.
Several gate configurations are available, from single to double, including a pool variant (A-09) that meets Quebec residential pool regulations.
Same structural base as ONYX-F1, with a streamlined gate configuration. The D profile suits projects that want to keep the classic look while narrowing the hardware choices.
The spiral cap and proportions are identical, only the gate selection differs.
A continuous secondary rail runs below the top rail, creating a second horizontal line. The visual read is calmer, with a marked architectural presence along the property.
Recommended for higher-end residential projects where the fence acts as a landscape element in its own right.
Pickets alternate between two heights, every other one shorter, creating a distinctive decorative rhythm. The model keeps the same rigid structure while delivering a more dynamic graphic feel.
This is the profile chosen when the goal is an ornamental fence that breaks from the classic template while staying understated.
Pickets sit in front of the rails instead of between them, which removes visible cuts and recalls higher-end steel fencing. The vertical line is continuous, uninterrupted.
A good fit for contemporary architecture and properties where the fence should recede without disappearing.
The five residential profiles share the same structural base. The differences are stylistic (cap, rail layout, picket arrangement), not structural. Gates and accessories are made from the same aluminum as the sections for a uniform finish over time.
| Material | Extruded aluminum, cast aluminum accessories |
|---|---|
| Pickets | 5/8" 脳 5/8" (15.875 mm), 60 mil thickness |
| Rails | 1" 脳 1-1/2" (25.4 脳 38.1 mm), 60 mil thickness |
| Available heights | 48", 60" and 72" (4, 5 and 6 feet) |
| Compatible posts | PF2 (2" 脳 2"), PF25 (2.5" 脳 2.5"), PF3 (3" 脳 3"), or reinforced 3 脳 3 steel option |
| Base plates | 4" 脳 4" 脳 1/4" for PF2 and PF25, 5" 脳 5" 脳 1/4" for PF3 |
| Post caps | Spiral, Lance, Ball, Pyramid or Flat (press-fit system) |
| Anchoring | Concrete footing below the frost line, 4 feet minimum |
| Warranty | 5 years (limited) on manufacturing defects |
Standard colours are kept in stock for quick delivery. Custom colours go through the factory paint line, with a typical 4 to 6 week lead time.
Physical samples are available on request to validate the final look before you commit to a colour.
