One system, built to close off the yard and keep it that way. Here is how the plank is made and what it mounts on. For the same frame with a wood-look board, see our composite fence.
Our PVC privacy system, installed plank by plank between the posts. Once the last plank drops in, the panel reads as a single surface.
It's the choice of homeowners who want to close off the yard once and never think about it again.
Each plank locks into the next with a tongue-and-groove profile, closing the panel with no gaps or play. Internal chambers keep the plank rigid across its full width.
The exact dimensions are in the table below, along with available heights and compatible posts.
The aluminum frame does the structural work. Vertical rails and top-and-bottom rails hold each plank in place. Gates are made to measure for each property layout.
| Material | PVC planks in an aluminum frame |
|---|---|
| Privacy | Full privacy |
| Board thickness | 7/8" (22.22 mm) |
| Visible width | 6" (152.40 mm) |
| Total plank | 6-1/4" × 72" (158.75 × 1828.8 mm) |
| Available heights | 60", 72", 96" (5, 6, 8 feet) |
| Compatible posts | PF2, PF25, PF3, or steel 3 × 3 |
| Frame | Aluminum, vertical and top-and-bottom rails |
| Colours | Brown, Grey, Taupe |
| Gates | Made to measure |
| Warranty | 5 years (limited) |
The PVC system mounts on PF2, PF25 or PF3 aluminum posts, chosen based on height and wind exposure. A steel 3 × 3 post is also available for gates and longer runs.
Three neutral tones, chosen to pair with the most common sidings. Brown sits well with wood and brick, Grey with contemporary cladding, and Taupe bridges the two.
Physical samples are available on request so you can confirm the final look before choosing your colour.
